KIT-MUS1

Head Unit Connection: The KIT-MMUS1 supports iDatalink's Direct T-Harnesses (sold separately) for direct connection to select iDatalink Serial Port compatible head units (including Kenwood, JVC, Alpine, Sony, and Pioneer radios) - replacing the wiring harness that comes with your aftermarket stereo (some hardwiring may still be required). If connecting to an aftermarket head unit that does not support an iDatalink Direct T-Harness, you'll need to cut off and remove the 20-pin black connector from the KIT-MUS1's harness and splice each wire directly to the aftermarket radio's corresponding wire.

Flashing Module via Weblink Desktop: The iDatalink Maestro RR or RR2 will need to be loaded with correct firmware before installation. The included USB cable plugs into your computer and allows you to "flash" the Maestro RR with the appropriate firmware to prepare it for installation. Simply download Weblink Desktop (for Windows and Mac) onto your computer to access the appropriate firmware.

OEM Grade Fit & Finish Kit: The KIT-MUS1 OEM integration kit features a factory grade fit & finish to match the contour and color of your vehicle's dash. This OEM integration kit lets you retain your vehicle's factory, secondary LCD screen for display of song/artist information, station identification, and Caller ID. The kit also features integrated, customizable climate control buttons and lets you adjust your climate controls from your compatible Alpine, JVC, Kenwood, Sony, or Pioneer head unit's touchscreen. In addition, the KIT-MUS1 OEM integration dash kit comes with a convenient pocket for storage. The storage pocket also provides dual USB ports (one USB-A and one USB-C) for your compatible Alpine, JVC, Kenwood, Sony, or Pioneer head unit.

Retained Features: The following factory features (if applicable) are retained when replacing your factory radio with a compatible iDatalink Serial Port head unit from Alpine, JVC, Kenwood, Sony, or Pioneer using the Maestro RR or RR2 Car Radio Replacement Interface module and KIT-MUS1 installation package.

• Sync & Bluetooth: Retains factory Sync with Media Player (USB-A/USB-C) & Bluetooth (Phone/Music).
• Factory Amplifier: Retains the factory amp (Sony or THX) with Turn On, Fader, DSP, Gain, & Speed Compensated Volume.
• Steering Wheel Controls: Factory steering wheel controls are retained with two function buttons and expandable radio functions.
• Climate Display & Control: The factory climate display and control can be accessed from the touchscreen of your compatible iDatalink aftemarket head unit.
• Secondary Vehicle Display: Secondary vehicle display is retained (if factory equipped) with audio information, hands-free information, and internal navigation.
• Park Assist: Park Assist chimes are retained through the use of the KIT-MUS1 (factory backup camera is not retained).

Note: When installing an aftermarket head unit without the iDatalink Serial Port, only steering wheel control and amplifier turn-on on are retained.

Extra Features: The following Extra features are added when replacing your aftermarket head unit with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Pioneer, Sony, or Alpine using the Maestro RR or RR2 Car Radio Replacement Interface module and KIT-MUS1 installation kit.

• Vehicle Info: Tire Pressure Display, Battery Voltage Display, Read/Reset Engine Codes, and Door Open Status with Warning.
• Gauges: Selectable Performance Gauges, "Track Pack" Gauges, and Read/Reset Check Engine Codes.

Outputs: The KIT-MUS1 provides Navigation, Accessory Power, and Illumination Outputs to make installation simpler.

• Navigation: Parking Brake, Reverse Light, and VSS (Vehicle Speed Sense).
• Accessory Power Output: 12V/15A Accessory Power Output
• Illumination Output: Illumination Output

• allows installation of select Alpine, JVC, Kenwood, Pioneer, and Sony receivers in 2010-14 Ford Mustangs (also requires the Maestro ADS-MRR module)
• retains the use of your factory steering wheel audio controls, climate controls, the factory LCD display, and the SYNC system
• includes dash console to match Ford Mustang dash
• package offers customizable climate control buttons and two USB ports
• displays engine performance data on touchscreen with select Alpine, JVC, Kenwood, Pioneer, and Sony receivers

USER MANUAL

The iDatalink Maestro KIT-MUS1 consists of an OEM integration dash kit and vehicle harness designed specifically for the 2012-2014 Ford Mustang equipped with a factory non-navigation radio (including Shaker systems).