HX1200.5

• 100 W x 4 + 480 W x 1 @ 4Ω
• 150 W x 4 + 800 W x 1 @ 2Ω
• 300 W X 2 (4 ohm)/ 800 X 1 (2ohm)
• S/N: ≤ 95 dBA / THD: .06%
• Dimensions: (Remote Included): 15.0" x 7.67" x 2" (382 x 195 x 51.5 mm)
• Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance
• 4-Layer PCB Board with Balanced Differential Inputs
• Full Range Class D IR Chipset
• "SNAP" Capacitors used Throughout the Circuit
• Audiophile Grade High Tolerance Components
• Spring Steel FET Clips Provide a Cleaner Board Design
• Illuminated Logo / Fully Concealed Mounting
• Output Clip Indicators for Precise Set-Up
• Fine Tuned Fully Variable Crossovers and Phase Control
• Top Mounted Controls for Convenient Amplifier Adjustment

• Amplifier    5 Channel
• RMS Power(2Ω)    150 W X 4/800 X 1
• RMS Power (4Ω)    100 W X 4/480 X 1
• RMS Bridge (mono 2Ω)    800 W X 1(sub output)
• RMS Bridge (mono 4Ω)    480 W X 1(sub output)
• RMS Bridge (stereo 4Ω)    300 W X 2 (4 Ω) / 800 X 1(2 Ω)
• Topology    Full-Range Class D
• Power Supply    Full PWM
• Power Supply (Threshold)    10.0VDC – 17.0VDC
• Idle Current    (0.7A)
• Distortion - THD (1KHz@4Ω)    0.06%
• Distortion - S/N Ratio (A weight @ 1W)    -80dBA
• Distortion - S/N Ratio (A weight @ FP)    -95dBA
• Input Sensitivity Low    200mV – 5.0V
• Input Sensitivity High    N/A
• Input Impedance - Low Input Level    20 KΩ
• Input Impedance - High Input Level    N/A
• Output Impedance    0.0297Ω
• Damping Factor (50Hz@4Ω)    >250
• Bandwidth (-3dB)    10Hz-35kHz
• Crossover (-12 dB/ Oct) Variable High-Pass    40Hz - 400Hz (-12dB Ch 1/2/3/4)
• Crossover (-12 dB/ Oct) Variable Low-Pass    30Hz - 300Hz (-12dB Ch 5)
• Crossover (-12 dB/ Oct) Variable Sub-Sonic    10-55Hz@18dB
• FUSE Ratings - ATC    40A X 2
• Dimension - Length x Width x Height - Inches(mm)    14.25″ x 7.67″ x 2″ (362 x 195 x 51.5 mm)

USER MANUAL