MICRO5V2

• 150W x 4CH / 350W @ 2Ω / 80W x 4CH / 200W @ 4Ω
• 250W x 2CH @ 4Ω Bridged (Front & Rear) RMS Power Output
• Input Sensitivity: 0.2-10 Volt
• Crossover Filter : Fixed 75Hz (HPF), 12dB Per Octave Slope (Front & Rear)
• 25-250Hz (LPF), 24dB Per Octave Slope (Sub)
• Frequency Response: 10-33KHz
• Selectable REM / VOX / DC Turn On Modes
• Selectable 3CH / 5CH Input Modes
• Dimensions: 10.65” x 4.0” x 1.46” / 270.5 x 103 x 37.2 mm
• Remote Bass Knob Included
• Disconnected RCA Input & Speaker Output Harness Kits Included

• Amplifier    5 Channel
• RMS Power Rating    950 W RMS
• RMS Power(2Ω)    150 W X 4/350 W X 1
• RMS Power (4Ω)    80 W X 4/200 W X1
• RMS Bridge (mono 4Ω)    300 W X 2/200 W X 1
• Topology    Full-Range Class D
• Power Supply    Full PWM
• Power Supply (Threshold)    10.0VDC – 17.0VDC
• Idle Current    (0.7A)
• Distortion - THD (1KHz@4Ω)    0.5%
• Distortion - S/N Ratio (A weight @ 1W)    -85dBA
• Distortion - S/N Ratio (A weight @ FP)    -101.1dBA
• Input Sensitivity Low    200mV – 10.0V
• Input Sensitivity High    N/A
• Input Impedance - Low Input Level    20 KΩ
• Input Impedance - AUX Input Level    20 KΩ
• Output Impedance    0.018Ω
• Damping Factor (50Hz@4Ω)    >70
• Bandwidth (-3dB)    10Hz-35Hz
• Crossover (-12 dB/ Oct) Variable High-Pass    Flat or Fixed 70Hz
• Crossover (-12 dB/ Oct) Variable Low-Pass    40Hz - 400Hz
• Crossover (-12 dB/ Oct) Variable Sub-Sonic    N/A
• FUSE Ratings - ATC    60A
• Dimension - Length x Width x Height - Inches(mm)    10.65″ x 4.0″ x 1.46″ (270.5 x 103 x 37.2 mm)

USER MANUAL