41KMT674

Overview: The Kicker KMT67 long-range tower speaker system consists of two UV treated injection molded ABS enclosures, each housing two 6-1/2" woofers and one 3/4" tweeter. The enclosures are designed to attach to your boat's wakeboard tower (or your Jeep's roll bar if you prefer) using the included hardware.

Drivers: The dual 6-1/2" woofers have rubber surrounds, are UV treated, and have sealed cone and motor assemblies to stand up to the environment. The 3/4" titanium dome tweeters are exponential horn-loaded and protected by open-cell foam.

Mounting: The KMT67 speakers use billet-aluminum mounting brackets and include inserts for seven common wakeboard tower tube sizes; 1-5/8", 1-3/4", 1-7/8", 2", 2-1/4", 2-3/8", and 2-1/2". Once the speakers are in place, but before the brackets are tightened, you can adjust the angle so they fire in the correct direction. The brackets are bolted to the top (or bottom if you flip it over) of the speakers, so custom brackets could be used for unique applications.

Note: The surface of the speaker enclosure is not flat, so they cannot simply be bolted to a flat surface.

Terminals: Each KMT67 speaker has a 5-way binding post to accommodate spade, pin, banana, and dual banana connectors, as well as bare wire up to 8 gauge.

Dimensions:

• Width: 19-1/8"
• Height: 9" (10-5/8" from the center of the tower when mounted)
• Depth: 11-1/2"

• 2-way tower speakers
• 6-3/4" polypropylene woofers with rubber surrounds
• 3/4" neo-titanium dome tweeters
• water- and UV-resistant components
• includes adjustable billet-aluminum brackets and clamp inserts
• 4-ohm impedance
• power range: 5-150 watts RMS (300 watts peak power)
• frequency response: 50-21,000 Hz
• sensitivity: 93 dB
• dimensions: 9"H x 19-1/8"W x 11-1/2"D

Support

Manuals

2014 KMT67 Tower System Manual | Multilingual | Download

Do you have a different model? Click Here

Support Links

Product FAQ
Product Warranties