P1000X1BD

• 12dB/octave Butterworth crossover
• High level input capable with Auto Turn-On circuit
• On-board Punch EQ with +18dB boost @ 45Hz
• RCA pass-thru outputs
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• Over current protection
• Cast aluminum heatsink
• Muted turn on
• Short circuit protection
• Stealth top mounted control panel
• Infrasonic filter
• 1 Year Warranty

Cta-2006 Compliant

• Number of Channels1

Total Power

• (Sum of Rated Power)1000 Watts
• Rated Power
• (RMS Continuous Power)300 Watts x 1 @ 4-Ohm
• 500 Watts x 1 @ 2-Ohm
• 1000 Watts x 1 @ 1-Ohm

Dynamic Power

• (PVC/PowerCube®)491 Watts x 1 @ 4-Ohms
• 874 Watts x 1 @ 2-Ohms
• 1,430 Watts x 1 @ 1-Ohm

BridgeableNo

• Frequency Response20Hz to 250Hz +/- 1.0dB
• Input Sensitivity150 mV - 12 V
• Circuit Topology ClassClass BD
• Efficiency (average)86% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise)4-Ohm: <1.0%
• 2-Ohm: <1.0%
• 1-Ohm: <1.0%
• Signal InputHi/Low level: 1 RCA pair
• Signal OutputHi/Low level: 1 RCA pair
• Tone ControlsPunch EQ2 Bass: 0dB to +18dB @ 45Hz
• Crossover ControlsLow-Pass (LP): 50-250Hz @ 12dB/octave Butterworth
• Infrasonic Filter (IF): 28Hz @ 12dB/Octave Butterworth

All-Pass: No

• Remote ControlsOptional Punch Level Control (PLC2) Ready
• Visual IndicatorsPower/Protect/Thermal LED
• Input Clip LED3
• Output Clip LED1,2,3

LED Color Legend:

• 1BLUE: <0.5% THD
• 2VIOLET: 1% THD
• 3RED: 10%+ THD
• Power Wire Gauge4 AWG
• Power Input ConnectorCaptive C-Clamp
• Speaker Wire Gauge8 AWG to 18 AWG
• Speaker Output ConnectorCaptive C-Clamp
• CoolingConvection
• Heatsink
• Operating Voltage9 - 16 VDC

Recommended Fuse

• (not included)140 A
• Average Current Draw (13.8V Music)65 A
• Max. Current Draw (13.8V Sinewave)130 A
• Suggested Alternator100 A

Included In The Box

• Dimensions (H x W x D)2.38 x 7.76 x 13.28 (in)
• 6.05 x 19.71 x 33.73 (cm)
   

2013 Punch Level Control 2 - owner's manual

2013 Punch amplifiers - owner's manual