
ROCKFORD FOSGATE $629.99
M5-800X4
4 channel Element Ready amplifier
125x4 @ 2O, 200x4 @ 4O, 400x2 @ 4O bridged
125x4 @ 2O, 200x4 @ 4O, 400x2 @ 4O bridged
- PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
- Element Ready™ design with integrated harness & panel seals
- Constant Power provides instantaneous delivery of output over varying impedance loads
- Play all day, easy to integrate, and keep music playing for extended lengths of time
- Quality & Performance tested using proprietary RATS (Rockford Automated Testing System)
- Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
- C.L.E.A.N. input/output clip detection and indicator LEDs
- MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
- Proprietary Class-AD technology allows amplifier to produce more power with less current draw
- Discrete Surface Mount technology with 1% tight-tolerances for high efficiency & reduced cross-talk
- OEM and aftermarket radio integration inputs
- Low Impedance Stability
- Top mounted control panel with Element Ready™ smoked lens cover
- Remote-Out feature when using high level inputs
- Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
- Balanced Differential Inputs eliminates noise picked up by signal cables
- 2-Year Warranty
- Cta-2006 Compliant
- Number of Channels4
Total Power
- (Sum of Rated Power)800 Watts
Rated Power
- (RMS Continuous Power)CTA-2006 GuidelinesCTA-2006 Continuous Power Rating
- ≤1.0% THD+N
- 100 Watts x 4 @ 4Ω
- 100 Watts x 4 @ 2Ω
- 200 Watts x 2 @ 4Ω Bridged/Mono
Dynamic Power
- (PVC/PowerCube®)CTA-2006 GuidelinesCTA-2006 Dynamic Power Rating
- 125 Watts x 4 @ 4Ω
- 200 Watts x 4 @ 2Ω
- 400 Watts x 2 @ 4Ω Bridged/Mono
- BridgeableYes
- Frequency Response10 Hz - 50 kHz
- Input Sensitivity150mVrms - 12Vrms
- Circuit Topology ClassClass-AD
- Efficiency (average)>75%
- Total Harmonic Distortion (THD+Noise)<0.25% THD+N @ 1 Watt
- Signal InputLow-Level: 4 RCA
- High-Level: (2) 4-Pin Molex
- Signal Output—
- Tone ControlsFront/Rear: 0-14dB @ 12.5kHz
- Front/Rear: 0-18dB @ 45Hz
- Crossover ControlsHigh-Pass:
- 50 Hz - 250 Hz @ 12dB/Octave Butterworth
Low-Pass:
- 50 Hz - 250 Hz @ 12dB/Octave Butterworth
- All-Pass: Yes
- Remote ControlsNo
- Visual IndicatorsPower: Blue
- Protect: Red
- Input Clip: Red
- Output Clip: Blue/Red
- Power Wire Gauge8 AWG
- Power Input ConnectorCompression Terminal Block
- Replacement 1040-57997
- Speaker Wire Gauge16 AWG
- Speaker Output Connector4-Pin Molex
- CoolingConvection
- HeatsinkExtruded Aluminum
- Operating Voltage9 - 16 VDC
- Recommended Fuse
- (not included)100A
- Average Current Draw (13.8V Music)4Ω Stereo: 29 A
- 2Ω Stereo: 29 A
- 4Ω Bridged: 29 A
- Max. Current Draw (13.8V Sinewave)4Ω Stereo: 55 A
- 2Ω Stereo: 85 A
- 4Ω Bridged: 90 A
- Suggested Alternator
Included in the Box
- (1) Control Cover (1130-75511-01)
- (1) Extension Harnesses (1130-75503-01)
- (1) Pwr/Gnd/Rem Connector (1040-61932-01)
- (1) Front RCA Input Harness (1560-56458-02)
- (1) Rear RCA Input Harness (1560-56727-02)
- (1) Front Spk Out Harnness (1560-56568-01)
- (1) Rear Spk Out Harness (1560-56544-01)
- (1) Allen wrench
- (1) RF sticker
- (1) PRESET warning label
- (1) Performance verification certificate
- Dimensions (H x W x D)1.7" x 4.25" x 8.41"
- (42.8 mm x 108 mm x 213 mm)
- Does not include harnesses
- Shipping Weight4.19 Lbs. (1.9 Kg.)
HD14-SBSUB prevent subwoofer failure - Advisory
M5 amplifiers must use included wiring harnesses - Installation Advisory
2021 M5-800X4, M5-1000X1, M5-1500X5 Compact Amps - owner's manual
2014+ Harley-Davidson® Radio Flash - Installation Advisory
Share:
Share on Facebook Share on Twitter Share on Pinterest Tell a friend