
ROCKFORD FOSGATE $629.99
M5-1000X1
Mono Element Ready amplifier
525x1 @ 4O, 900x1 @ 2O, 1000x1 @ 1O
525x1 @ 4O, 900x1 @ 2O, 1000x1 @ 1O
- Play all day, easy to integrate, and keep music playing for extended lengths of time
- PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
- Element Ready™ design with integrated harness & panel seals
- Constant Power provides instantaneous delivery of output over varying impedance loads
- Quality & Performance tested using proprietary RATS (Rockford Automated Testing System)
- Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
- C.L.E.A.N. input/output clip detection and indicator LEDs
- Class-BD technology provides 75-80% efficiency over traditional class A/B designs
- MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
- Low Impedance Stability
- Discrete Surface Mount technology with 1% tight-tolerances for high efficiency & reduced cross-talk
- OEM and aftermarket radio integration inputs
- Top mounted control panel with Element Ready™ smoked lens cover
- Remote-Out feature when using high level inputs
- Balanced Differential Inputs eliminates noise picked up by signal cables
- Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
- 2-Year Warranty
- Cta-2006 Compliant
- Number of Channels1
Total Power
- (Sum of Rated Power)1000 Watts
Rated Power
- (RMS Continuous Power)CTA-2006 GuidelinesCTA-2006 Continuous Power Rating
- ≤1.0% THD+N
- 500 Watts x 1 @ 4Ω
- 750 Watts x 1 @ 2Ω
- 750 Watts x 1 @ 1Ω
Dynamic Power
- (PVC/PowerCube®)CTA-2006 GuidelinesCTA-2006 Dynamic Power Rating
- 525 Watts x 1 @ 4Ω
- 900 Watts x 1 @ 2Ω
- 1000 Watts x 1 @ 1Ω
- Bridgeable—
- Frequency Response30Hz - 245Hz
- Input Sensitivity150mVrms - 12Vrms
- Circuit Topology ClassClass-BD
- Efficiency (average)>80%
- Total Harmonic Distortion (THD+Noise)<0.1% THD+N @ 1 Watt
- Signal InputLow-Level: 2 RCA
- High-Level: 4-Pin Molex
- Signal Output—
- Tone ControlsSub: 0-18dB @ 45Hz
- Crossover ControlsLow-Pass:
- 50 Hz - 250 Hz @ 12dB/Octave Butterworth
- Infrasonic:
- 30 Hz @ 12dB/Octave Butterworth
- Remote ControlsNo
- Visual IndicatorsPower: Blue
- Protect: Red
- Input Clip: Red
- Output Clip: Blue/Red
- Power Wire Gauge8 AWG
- Power Input ConnectorCompression Terminal Block
- Replacement 1040-57997
- Speaker Wire Gauge16 AWG
- Speaker Output Connector4-Pin Molex
- CoolingConvection
- HeatsinkExtruded Aluminum
- Operating Voltage9 - 16 VDC
- Recommended Fuse
- (not included)120A
- Average Current Draw (13.8V Music)4Ω: 23 A
- 2Ω: 53 A
- 1Ω: 64 A
- Max. Current Draw (13.8V Sinewave)4Ω: 46 A
- 2Ω: 75 A
- 1Ω: 88 A
- Suggested Alternator
Included in the Box
- (1) Control Cover (1130-75511-01)
- (1) Extension Harnesses (1130-75505-01)
- (1) Pwr/Gnd/Rem Input (1040-61932-01)
- (1) RCA Input Harness (1560-56458-02)
- (1) Speaker Out Connector (1040-56811)
- (1) Allen wrench
- (1) RF sticker
- (1) PRESET warning label
- (1) Performance verification certificate
M5 amplifiers must use included wiring harnesses - Installation Advisory
2021 M5-800X4, M5-1000X1, M5-1500X5 Compact Amps - owner's manual
2014+ Harley-Davidson® Radio Flash - Installation Advisory
Share:
Share on Facebook Share on Twitter Share on Pinterest Tell a friend