)
Audio Frog
GB60
GB60 6" Audiophile Grade Automotive Loudspeaker, 4-Ohm, 100W RMS, 300W Peak, Designed to be used in two or three way systems (GB10/GB15 and GB25), Includes grille and installation kit
- Treated Paper Cone
- 2” (51 mm) Voice Coil on Fiberglass Former
- Milled Flat Single-Layer CCAL Voice Coil, Black Coated for Increased Heat Dissipation
- Copper Inductance- and Distortion-Reducing Pole Piece Cap
- Neodymium Motor with Aluminum Shorting Ring
- Flat, Progressive Nomex® Spider
- Nitrile Butadiene Rubber Surround
- Proprietary Vented Cast Aluminum Basket
- Chrome-Plated Cast Zinc Motor Housing
- Screw Terminals
- All-Metal Grille and Mounting Kits Included
- Multi-Adapter Included for 6-1/2″ and 6-3/4″ Factory Locations
- Hex Screws and Tools Included
- Removable and Paintable Grille
- Rub-On Grille Logos Included for Custom Installation
- Nominal Impedance: 4Ω
- RMS Power Handling: 100 W (with recommended crossover)
- Peak Power Handling: 300 W (with recommended crossover)
- Frequency Response (-3 dB): 60 Hz – 7 kHz
- Sensitivity (2.83 V/1 M): 88 dB
- Recommended Amplifier RMS Power Range: 20 W – 125 W
- Recommended High Pass Filter Frequency and Slope: ≥ 70 Hz, ≥ 12 dB/oct
- Recommended Low Pass Filter Frequency and Slope: ≤ 3.5 kHz, ≥ 12 dB/oct
Dimensions:
Frequency Response & Impedance:
Thiele & Small Parameters:
- Revc: 3.4 Ω
- Levc@1kHz: 0.13 mH
- Sd: 122.7 cm²
- Mmd: 19.3 g
- Mms: 20.1 g
- Cms: 290 µM/N
- Vas: 6.23 liters
- Fs: 66 Hz
- BL: 7.4 TM
- Qms: 7.4
- Qes: 0.51
- Qts: 0.48
- Xmax (1-way linear): 9mm (3/8”)
- Basket Displacement: 0.43 liters (0.015ft³)
Reviews
Accessories
Showcased Accessories
Please choose a department and category to see accessories compatible with this product.
Add-ons
Share:
Share on Facebook Share on Twitter Share on Pinterest Tell a friend