G60S

• Rigid and shallow steel woofer basket
• Parabolic polypropylene woofer cone
• Nitrile butadiene rubber surround
• 1” (25mm) copper voice coil on Kapton® former
• Flat progressive Nomex® spider
• Ferrite magnet
• 1” (25mm) fabric dome neodymium tweeters
• Tweeters include reflection absorbing and diffusing foam pad
• Convenient and innovative tweeter flush mounting kit
• In-line crossovers with speaker connectors already installed
• 12dB/octave tweeter high pass filter with protection circuit
• 6dB/octave woofer low pass filter
• Multiadapter included for factory fitment in many cars

• Nominal Impedance: 4Ω
• RMS Power Handling: 50 W (with crossover)
• Peak Power Handling: 120 W (with crossover)
• Frequency Response:50 Hz – 20 kHz
• Sensitivity (2.83 V/1 M): 89 dB
• Recommended Amplifier RMS Power Range: 15 W – 75 W

Dimensions:

• Cut-out Diameter (woofer): 132.5 mm (5-7/32”)
• Overall Diameter (woofer): 158.2 mm (6-15/64″)
• Overall Diameter Including Mounting Tabs (woofer): 166 mm (6-17/32″)
• Mounting Depth (woofer): 51.2 mm (2-1/64″)
• Mounting Height (woofer): 12 mm (15/32″)
• Cut-out Diamater (tweeter flush mount): 48 mm (1-57/64”)
• Overall Diameter (tweeter flush mount): 54 mm (2-1/8”)
• Mounting Depth (tweeter flush mount): 13 mm (33/64”)

Theile & Small Parameters(Woofer):

• Revc: 2.25 Ω
• Levc@1kHz: 0.13 mH
• Sd: 143.14 cm²
• Mmd: 11.8 g
• Mms: 12.37 g
• Cms: 317 µM/N
• Vas: 9.12 liters
• Fs: 80.39 Hz
• BL: 3.91 TM
• Qms: 7.89
• Qes: ..92
• Qts: 0..83
• Xmax (1-way linear): 4 mm (5/32”)
• Basket Displacement: 0.24 liters (0.008 ft³)

Theile & Small Parameters(Tweeter):

• Fs: 1.5 kHz
• Revc: 4 Ω

Frequency Response Graph:

Impedance Graph:

USER MANUAL