DMD1100.6D

• 6 Channel Full Range Digital Amplifier
• 350W x 2CH @ 1Ω (CH5 & CH6 Only)
• 125W x 4CH + 250W x 2CH @ 2Ω / 80W x 4CH + 125W x 2CH @ 4Ω RMS Power Output
• 250W x 2CH + 500W x 1CH @ 4Ω RMS Bridged Power Output
• 700W x 1CH @ 2Ω RMS Bridged Power Output (CH5 & CH6 Only)
• Input Sensitivity: 0.2-10 Volt
• Selectable X-Over: LPF / FULL / HPF
• Crossover Filter : 50-500Hz, 12dB Per Octave Slope
• Frequency Response: 10-20KHz
• Signal to Noise Ratio: > 90dB
• Overall Operation Efficiency: >86%
• Selectable REM / VOX / DC Turn On Modes
• Selectable 2CH / 6CH Input Modes
• Dimensions: 9.76" x 6.85" x 1.9" / 248.1 x 174 x 48.4 mm

• RMS Power(2Ω)    125W x 4 + 250W x 2
• RMS Power (4Ω)    80W x 4 + 125W x 2
• Topology    Full range Class D
• Power Supply    Full PWM
• Power Supply (Threshold)    10.0VDC - 17.0VDC
• Idle Current    (0.7A)
• Distortion - THD (1KHz@4Ω)    0.05%
• Distortion - S/N Ratio (A weight @ 1W)    -77.2dBA
• Distortion - S/N Ratio (A weight @ FP)    -98.9dBA
• Input Sensitivity Low    0.2mV - 10.0V
• Input Sensitivity High    Yes - UP to 25W RMS
• Input Impedance - Low Input Level    22KΩ
• Input Impedance - High Input Level    22KΩ
• Output Impedance    0.047Ω
• Damping Factor (50Hz@4Ω)    >250
• Bandwidth (-3dB)    10Hz-350Hz
• Crossover (-12 dB/ Oct) Variable High-Pass    50-500Hz
• Crossover (-12 dB/ Oct) Variable Low-Pass    50-500Hz
• Crossover (-12 dB/ Oct) Variable Sub-Sonic    N/A
• FUSE Ratings - ATC    40A x 3
• Dimension - Length x Width x Height - Inches(mm)    9.76" x 6.85" x 1.9" (248.1mm x 174mm x 48.4mm)

USER MANUAL