APS10D

• Ultra-low profile (4.7 in. / 120 mm) for maximum installation flexibility. 
• Designed to deliver maximum performance in a sealed enclosure starting from 10 lt.
• Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (11 mm, one-way) while keeping the
• mounting depth to minimum.
• Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure.
• Massive motor assembly, optimized with FEM (Finite Element Modeling) for perfect control under high power, high excursion conditions.
• Water-repellent pressed paper 10 in. cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer.
• Dual voice coil design specifically developed to be combined with either AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub CH) or AP4.9 bit/AP4 D (2 CH bridged) amplifiers.
• Steel mesh grille and plastic gasket included.

• Size    250 mm
• Power Handling - Peak    800 W
• Power Handling - Continuous    400 W
• Impedance    4.4 Ohm
• Magnet Material    HIGH DENSITY FLUX FERRITE
• Voice Coil Ø    60 mm
• Woofer Qes    0,58
• Cone Material    WATER REPELLENT PRESSED PAPER
• Xmax    12.6 mm
• Xmech    18 mm

ELECTRIC-ACOUSTIC SPECS

• D    220 mm
• Driver Displacement Volume    1.12
• Re    2.2 Ohm
• Fs    27 Hz
• Vas    41 l
• Mms    170 g
• Cms    0.2 mm/N
• BL    10.4 T•m
• Qms    4.7
• Qts    0.52
• Le Standard    1.5 mH
• Spl    84 dB

GENERAL

• Weight    5.24 kg

DIMENSIONS

• Dimension A    270 mm
• Dimension B    233 mm
• Dimension C    105 mm
• Dimension D    88 mm

OWNER'S MANAUL