48CWR102

Dual Voice Coils: This woofer features dual 2Ω voice coils, offering wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 1Ω load. When the voice coils are wired in series, the woofer presents a 4Ω load.

Cooling: Kicker engineers developed a Forced Air Cooling system, using the motor structure to pull air across the voice coils, helping the sub run up to 25% cooler than the previous model.

Sealed Enclosures: Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Kicker recommends sealed enclosures from 0.8 ft³ to 1.25 ft³.

Vented Enclosures: Vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from a given amount of power. Kicker recommends the following ported enclosures:

• Minimum Enclosure Volume: 1.25 ft³ with a 10½" x 2" x 20" slot port
• Maximum Enclosure Volume: 1.75 ft³ with a 10½" x 2½" x 20" slot port

• 10" subwoofer with dual 2-ohm voice coils
• injection-molded polypropylene cone
• double-stitched Santoprene rubber surround
• steel basket
• power handling: 400 watts RMS (200 watts per coil)
• peak power handling: 800 watts
• frequency response: 30-500 Hz
• sensitivity: 84.6 dB
• top-mount depth: 5.25"
• sealed box volume: 0.80 - 1.25 cu. ft.
• ported box volume: 1.25 - 1.75 cu. ft.
• grille not included

USER MANUAL