SB-F-150-SPRCRW/13TW5v2/BK

• Thin-Line Design: The patented thin-line woofer technology compresses the architecture of the 13TW5v2-2 subwoofer and allows it to deliver great bass performance in tight space applications, with as little as 2.5" depth. Central to the technology is the "concentric tube" structure that supports the oversized voice coil and the suspension attachments. This permits placing the motor of the woofer much further forward in the speaker than with conventional designs, while maintaining excellent linear excursion capability. Equally important is the fact that the 13TW5v2-2 design is optimized for extremely small enclosure volume applications. Whereas a typical small-box 12-inch driver operates in well over one ft³, the larger 13TW5v2-2 is optimized for only 0.80 ft³ (significantly less volume than other JL Audio 13.5-inch woofers).
• Concentric Tube Suspension: The challenge in any low-profile woofer design is to permit enough mechanical clearance for the speaker to handle power and generate good output at low frequencies. JL Audio's patented solution employs a molded structure which spans over the edge of the motor system, supporting the spider on the outside of the motor's boundaries and the large diameter voice coil on the inside. The large voice coil permits the magnet to sit inside it, rather than surrounding the coil as is typical in most woofers. The concentric tube structure and the elimination of a conventional top-plate helps JL Audio place the motor system higher up into the cone body's space to further compress depth, while still permitting excellent mechanical excursion.
• Mica-Filled Polypropylene Woofer: The subwoofer features an injection-molded, mica-filled polypropylene cone woofer with a Santoprene rubber surround for added durability, woofer excursion and bass response.
• Dynamic Motor Analysis (DMA): DMA is JL Audio's proprietary method of improving dynamic motor behavior. As a result of DMA optimization, the 13TW5v2-2's motor maintains a linear motor force over a long excursion range, and also maintains a stable fixed magnetic field in the gap over a wide power range. The result is vastly reduced distortion, faithfully reproduced transients, and tight, clean, articulate bass.
• Floating Cone Attachment Method (FCAM): JL Audio's patented FCAM technology is an innovative method of bonding the surround/cone assembly to the voice coil/spider assembly. This assembly technique ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.
• Extra Large Voice Coils: To counteract the efficiency tradeoff of small box volumes, the 13TW5v2-2 is designed to handle very high power levels thanks to the use of a very large 7-inch diameter voice coil.

• Stealthbox® custom-fit subwoofer
• sealed fiberglass enclosure
• 13TW5v2-2 13" 2-ohm subwoofer
• installs under the driver side of the rear bench seat
• power handling: 100-600 watts RMS (1,200 watts peak power)
• MFR # 94462

JL Audio Stealthbox® owner's manual