R2-200X2

• Balanced Differential Inputs with RCA Pass Through Outputs
• Variable Input Gain adjustment level
• Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
• High Level Input Capable
• Features C.L.E.A.N. Set-up
• Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
• Short Circuit & Over Current Protection
• Top Mounted Control Panel
• Cast aluminum heat sink
• CEA-2006 Compliant & CE Compliant
• Full Range Class-D
• 1 Year Warranty

• Cta-2006 Compliant
• Number of Channels2
• Total Power
• (Sum of Rated Power)200 Watts
• Rated Power
• (RMS Continuous Power)50 Watts x 2 @ 4Ω
• 100 Watts x 2 @ 2Ω
• 200 Watts x 1 @ 4Ω Bridged/Mono
• Dynamic Power
• (PVC/PowerCube®)60 Watts x 2 @ 4Ω
• 107 Watts x 2 @ 2Ω
• 215 Watts x 1 @ 4Ω Bridged/Mono
• BridgeableYes
• Frequency Response20 Hz - 20 kHz
• Input SensitivityLow-Level: 150 mV - 4 V
• High-Level: 450 mV - 12 V
• Circuit Topology ClassClass-D
• Efficiency (average)
• Total Harmonic Distortion (THD+Noise)4Ω: <1.0%
• 2Ω: <1.0%
• Signal InputLow-Level: 2 RCA
• High-Level: 4-Pin Molex
• Signal OutputLow-Level: 2 RCA
• (Pass-Thru active with RCA or Hi-Level input)
• Tone ControlsNo
• Crossover ControlsHigh-Pass:
• 50 Hz - 250 Hz @ 12dB/Octave Butterworth
• Low-Pass:
• 50 Hz - 250 Hz @ 12dB/Octave Butterworth
• All-Pass: Yes
• Remote ControlsNo
• Visual IndicatorsPower/Protect
• C.L.E.A.N. In
• C.L.E.A.N. Out
• Power Wire Gauge4 AWG
• Power Input ConnectorCompression Terminal Block
• Speaker Wire Gauge8 AWG
• Speaker Output ConnectorCompression Terminal Block
• CoolingConvection
• Heatsink
• Operating Voltage9 - 16 VDC
• Recommended Fuse
• (not included)30 A
• Average Current Draw (13.8V Music)
• Max. Current Draw (13.8V Sinewave)18 A
• Suggested Alternator
• Included In The Box
• Dimensions (H x W x D)1.9" x 6.8" x 8.1"
• (4.9 cm x 17.3 cm x 20.5 cm)
• Shipping Weight

2019/2020 R2 amplifiers - owner's manual

Show all Knowledge Base topics