MX280/4

• 4-Channel Class D Full-Range Amplifier, 70 W x 4 @ 2 Ω / 50 W x 4 @ 4 Ω - 14.4V
• Engineered specifically for powersports applications, the 4-channel MX280/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.
• Generating a solid 50W x 4 into 4 ohms (14.4V, 1% THD), the MX280/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 140W x 2 into 4 ohms.
• Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.
• This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.

• Frequency Response    20 Hz - 20 kHz (+0, -1dB)
• S/N Ratio, referred to highest rated power    >89.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W    >68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω    >60 / 50 Hz
• Damping Factor @ 2 Ω    >30 / 50 Hz
• THD+N @ Rated Power    <1% @ 2 Ω per Ch.
• Input Voltage Range @ RCA Inputs    Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High)
• Min.Copper Power / Ground Wire Gauge    8 AWG wire
• Fuse Rating    35 A (AFS, AGU or MaxiFuse™)
• Height (H)    1.77 in / 45 mm
• Width (W)    8.66 in / 220 mm
• Depth (D)    3.09 in / 78.5 mm
• Net Weight    3.18 lb / 1.44 kg

USER MANUAL