MICRO2V2

• 2 Channel Full Range Digital Amplifier
• 250W x 2CH @ 2Ω / 150W x 2CH @ 4Ω / 500W x 1CH @4Ω Bridged RMS Power Output
• Input Sensitivity: 0.2-10 Volt
• Crossover Filter : 40-400Hz, 12dB Per Octave Slope
• Frequency Response: 10-33KHz
• Selectable REM / VOX / DC Turn On Modes
• Selectable X-Over: LPF / FLAT / HPF
• Dimensions: 7.89” x 4.1” x 1.46” / 200.5 x 103 x 37.2 mm
• Remote Bass Knob Included
• Disconnected RCA Input & Speaker Output Harness Kits Included

• Amplifier    2 Channel
• RMS Power Rating    500 W RMS
• RMS Power(2Ω)    250 W X 2
• RMS Power (4Ω)    150 W X 2
• RMS Bridge (mono 4Ω)    500 W X 1
• Topology    Full-Range Class D
• Power Supply    Full PWM
• Power Supply (Threshold)    10.0VDC – 17.0VDC
• Idle Current    (0.7A)
• Distortion - THD (1KHz@4Ω)    0.5%
• Distortion - S/N Ratio (A weight @ 1W)    -85dBA
• Distortion - S/N Ratio (A weight @ FP)    -101.1dBA
• Input Sensitivity Low    200mV – 10.0V
• Input Sensitivity High    N/A
• Input Impedance - Low Input Level    20 KΩ
• Input Impedance - AUX Input Level    20 KΩ
• Output Impedance    0.0297Ω
• Damping Factor (50Hz@4Ω)    >250
• Bandwidth (-3dB)    10Hz-35kHz
• Crossover (-12 dB/ Oct) Variable High-Pass    40Hz-400Hz
• Crossover (-12 dB/ Oct) Variable Low-Pass    40Hz-400Hz
• Crossover (-12 dB/ Oct) Variable Sub-Sonic    N/A
• FUSE Ratings - ATC    25A
• Dimension - Length x Width x Height - Inches(mm)    7.89″ x 4.0″ x 1.46″ (200.5 x 103 x 37.2 mm)

USER MANUAL