ROCKFORD FOSGATE $929.99
M5-1500X5
5 ch. Element Ready amplifier 125x4 + 400x1 @ 4O, 200x4 + 700x1 @ 2O, NA + 700x1 @ 1O, 400x2 @ 4O + NA Bridged
- Play all day, easy to integrate, and keep music playing for extended lengths of time
- PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
- Element Ready™ design with integrated harness & panel seals
- Quality & Performance tested using proprietary RATS (Rockford Automated Testing System)
- Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
- C.L.E.A.N. input/output clip detection and indicator LEDs
- Constant Power provides instantaneous delivery of output over varying impedance loads
- Proprietary Class-AD technology allows amplifier to produce more power with less current draw
- Class-BD technology provides 75-80% efficiency over traditional class A/B designs
- Low Impedance Stability
- Top mounted control panel with Element Ready™ smoked lens cover
- OEM and aftermarket radio integration inputs
- Discrete Surface Mount technology with 1% tight-tolerances for high efficiency & reduced cross-talk
- Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
- MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
- Remote-Out feature when using high level inputs
- Balanced Differential Inputs eliminates noise picked up by signal cables
- 2-Year Warranty
- Cta-2006 Compliant
- Number of Channels5
Total Power
- (Sum of Rated Power)1500 Watts
Rated Power
- (RMS Continuous Power)CTA-2006 GuidelinesCTA-2006 Continuous Power Rating
- ≤1.0% THD+N
- 100W x 4 + 400W x 1 @ 4Ω
- 100W x 4 + 600W x 1 @ 2Ω
- N/A x 4 + 600W x 1 @ 1Ω
- 200W x 2 + N/A x 1 @ 4Ω Bridged
Dynamic Power
- (PVC/PowerCube®)CTA-2006 GuidelinesCTA-2006 Dynamic Power Rating
- 125W x 4 + 400W x 1 @ 4Ω
- 200W x 4 + 700W x 1 @ 2Ω
- N/A x 4 + 700W x 1 @ 1Ω
- 400W x 2 + N/A x 1 @ 4Ω Bridged
- BridgeableYes
- Frequency Response10Hz - 50kHz
- Input Sensitivity150mVrms - 12Vrms
- Circuit Topology ClassClass-AD (front/rear channels)
- Class-BD (sub channel)
- Efficiency (average)>75%
- Total Harmonic Distortion (THD+Noise)<0.2% THD+N @ 1 Watt
- Signal InputLow-Level: 2 RCA
- High-Level: 4-Pin Molex
- Signal Output—
- Tone ControlsFront/Rear: 0-14dB @ 12.5kHz
- Front/Rear: 0-18dB @ 45Hz
- Sub: 0-18dB @ 45 Hz
Crossover ControlsHigh-Pass:
- 50 Hz - 250 Hz @ 12dB/Octave Butterworth
Low-Pass:
- 50 Hz - 250 Hz @ 12dB/Octave Butterworth
Infrasonic:
- 30 Hz @ 12dB/Octave Butterworth
- Remote ControlsNo
- Visual IndicatorsPower: Blue
- Protect: Red
- Input Clip: Red
- Output Clip: Blue/Red
- Power Wire Gauge4 AWG
- Power Input ConnectorCompression Terminal Block
- Speaker Wire Gauge16 AWG
- Speaker Output Connector4-Pin Molex
- CoolingConvection
- HeatsinkExtruded Aluminum
- Operating Voltage9 - 16 VDC
- Recommended Fuse
- (not included)200A
- Average Current Draw (13.8V Music)2Ω Stereo + 1Ω Sub: 48 A
- Max. Current Draw (13.8V Sinewave)2Ω Stereo + 1Ω Sub: 123 A
- Suggested Alternator—
Included in the Box
- (1) Control Cover (1130-75511-01)
- (1) Extension Harnesses (1130-75507-01)
- (1) Pwr/Gnd/Rem Connector (1040-60814-01)
- (1) Front/Rear/Sub RCA Harness (1130-70118-01)
- (1) Front Speaker Out Harness (1560-56568-01)
- (1) Rear Speaker Out Harness (1560-56544-01)
- (1) Subwoofer Out Connector (1040-56811)
- (1) Allen wrench
- (1) RF sticker
- (1) PRESET warning label
- (1) Performance verification certificate
- Dimensions (H x W x D)1.7" x 4.25" x 12.3"
- (42.8 mm x 108 mm x 311.4 mm)
- Does not include harnesses
- Shipping Weight6 Lbs. (2.7 Kg.)
Test M5-1500X5 - owner's manual
M5 amplifiers must use included wiring harnesses - Installation Advisory
2021 M5-800X4, M5-1000X1, M5-1500X5 Compact Amps - owner's manual
2014+ Harley-Davidson® Radio Flash - Installation Advisory
Share:
Share on Facebook Share on Twitter Share on Pinterest Tell a friend