KIT-R8

Head Unit Connection: The KIT-R8 supports iDatalink's Direct T-Harnesses (sold separately) for direct connection to select iDatalink Serial Port compatible head units (including Kenwood, JVC, Alpine, Sony, and Pioneer radios) - replacing the wiring harness that comes with your aftermarket stereo (some hardwiring may still be required). If connecting to an aftermarket head unit that does not support an iDatalink Direct T-Harness, you'll need to cut off and remove the 20-pin black connector from the KIT-R8's harness and splice each wire directly to the aftermarket radio's corresponding wire.

Flashing Module via Weblink Desktop: The iDatalink Maestro RR or RR2 will need to be loaded with correct firmware before installation. The included USB cable plugs into your computer and allows you to "flash" the Maestro RR or RR2 with the appropriate firmware to prepare it for installation. Simply download Weblink Desktop (for Windows and Mac) onto your computer to access the appropriate firmware.

Factory Fit & Finish Kit: The KIT-R8 Installation Integration Kit features a factory grade fit & finish to match the contour and color of your vehicle's dash. The dash kit is compatible with double-DIN (4" tall) Alpine, JVC, Kenwood, Sony, or Pioneer receivers equipped with an iDatalink Serial Port. The dash kit even offers integrated push-button controls for the most often used control functions such as Source Select, Volume Up/Down, Answer/End Phone Call, Voice Recognition, Gauges/Vehicle Info, Previous/Next Track, and Mute.

Retained Features: The following factory features (if applicable) are retained when replacing your aftermarket head unit with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Alpine, or Pioneer using the Maestro RR or RR2 Car Radio Replacement Interface module and KIT-R8
R8 integration installation kit.

• Factory Amplifier: Retains factory amplifier with balance and fade control.
• Steering Wheel Controls: Factory steering wheel controls are retained with two function buttons and expandable radio functions.
• Backup Camera: Factory backup camera is retained with parking guidelines, as long as your aftermarket radio features a composite video backup camera input. If you add an aftermarket front camera (sold separately) to your iDatalink compatible head unit that is equipped with multiple camera inputs, the vehicle's factory auto camera switching feature is also retained.
• Secondary Vehicle Display: Song/Artist Info & Caller ID displayed on the factory installed Multi-Function Display (MFD) in the vehicle's instrument panel (if equipped).

Extra Features: The following Extra features are added when replacing your aftermarket head unit with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Pioneer, Sony, or Alpine using the Maestro RR or RR2 Car Radio Replacement Interface module and KIT-R8 installation kit.

• Vehicle Info: Tire Pressure Display, Battery Voltage Display, Read/Reset Engine Codes, and Door Open Status with Warning.
• Gauges: Selectable Performance Gauges, "Track Pack" Gauges, and Read/Reset Check Engine Codes.

Outputs: The KIT-R8 provides Navigation, Accessory Power, and Illumination Outputs to make installation simpler.

• Navigation: Parking Brake, Reverse Light, and VSS (Vehicle Speed Sense).
• Accessory Power Output: 12V/15A Accessory Power Output
• Illumination Output: Illumination Output

• allows you to install an iDatalink-compatible double-DIN (4") radio in select 2008-15 Audi vehicles
• requires Maestro ADS-MRR or ADS-MRR2 interface module (sold separately)
• includes dash kit, mounting brackets, and wiring harnesses
• compatible with iDatalink's head-unit-ready harnesses
• retains these Audi features:
  • steering wheel audio controls
  • factory backup camera
  • factory amplifier including balance and fade controls
• displays vehicle information and gauges on new radio screen
• provides outputs (parking brake, reverse, vehicle speed sense (V.S.S) for navigation and video receivers
• provides 12V accessory power
• provides illumination output

USER MANUAL

The iDatalink Maestro KIT-R8 consists of a dash kit and vehicle harness designed specifically for select 2008-2015 Audi R8 vehicles (all trim levels).