
CX 130
1. Soft Tetolon® fiber 24 mm (0.9 in.) dome tweeter cooled with ferrofluid, for extended and natural high frequencies.
2. RHFC ™ (Rotary High Frequency Contour) tweeter angled and directable to the listener for a perfect frequency response in any installation scenario.
3. Tweeter faceplate geometry optimized with FEM simulations (Finite Element Modeling), to provide an extremely linear frequency response in off-axis installations.
4. 25 mm (1 in.) woofer voice coil featuring an aluminum former to guarantee high excursion and power handling.
5. 130 mm (5 in.) semi-pressed paper cone SPP-M (Semi Pressed Paper-Mica) enhanced with Mica powder for an excellent balance between lightness and damping.
6. High-density flux ferrite magnet combined with low-carbon polar plates for reduced distortion at high power levels.
7. Compact and transparent three-spoke basket acoustically combined with a rubber magnet cover for total damping of spurious vibrations.
8. Elegant grille made with high-resistance ABS plastic structure with a metallic finish combined with a protective metal mesh, available as optional.
Component | Coaxials |
Size mm (in.) | 130 (5) |
Power Handling - Continuous W | 50 |
Power Handling - Peak W | 150 |
Impedance Ohm | 4 |
Woofer Voice Coil Ø mm (in.) | 25 (1) |
Tweeter Voice Coil Ø mm (in.) | 13 (0.5) |
Frequency Response Hz | 65 ÷ 22k |
Tweeter Magnet size D x h mm (in.) | 13 x 2 (0.51 x 0.08) |
Weight of one speaker kg (lb.) | 0,73 (1.61) |
Woofer Magnet | High density flux ferrite |
Tweeter Magnet | Neodymium |
Cone | Semi-pressed paper + Mica |
Dome | Tetolon |
Xmech mm (in.) | 3,8 (0.15) |
D mm | 110 |
Re Ohm | 3,1 |
Fs Hz | 80 |
Le mH | 0,18 |
Vas I | 13,5 |
Mms g | 7,6 |
Cms mm/N | 0,50 |
BL T*m | 4,2 |
Qts | 0,56 |
Qes | 0,67 |
Qms | 3,5 |
Spl dB | 92,5 |
Share:
Share on Facebook Share on Twitter Share on Pinterest Tell a friend