)
52CVT102
Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation. The boot is removable if needed for tight installations.
Break-in Period: The high-performance suspension system makes the speaker very stiff out-of-the-box. Approximately two weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
Sealed Enclosures: Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Kicker recommends sealed enclosures from 0.8 ft³ to 3.0 ft³.
Vented Enclosures: Vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from a given amount of power. Kicker recommends ported enclosures in the following range:
- Minimum Enclosure Volume: 1.25 ft³ with a 10½" x 2" x 20" slot port
- Maximum Enclosure Volume: 1.75 ft³ with a 10½" x 2½" x 20" slot port
- 10" 2-ohm subwoofer
- injection-molded polypropylene cone with Santoprene rubber surround
- power handling: 375 watts RMS
- peak power handling: 750 watts
- sensitivity: 87.2 dB
- frequency response: 25-500 Hz
- top-mount depth: 4-1/4"
- sealed box volume: 0.8 - 3.0 cu. ft.
- ported box volume: 1.25 - 1.78 cu. ft.
- grille not included
Share:
Share on Facebook Share on Twitter Share on Pinterest Tell a friend